Provides navigation trigger wires and timed accessory output for replacing the factory radio and retains the factory installed amplified audio system. Use the provided Steering Wheel Control output plug with a steering wheel interface module to retain function of all factory controls.
Data controlled:
- RAP accessory output wire
- Reverse trigger wire
- Illumination output wire
- Parking brake wire
- Vehicle speed sense wire
Retains:
- Keeps Data-Bus Intact for Vehicle Service & Emissions Testing
- Vehicle entertainment system (CHYRVD required for VES video in/out)
- Rear seat entertainment and dual zone audio
- Factory-installed amplified audio system
- Single wire output for steering wheel control module
NOTE: Does not support fading in Premium Amplified Systems. Does not retain Uconnect.
- "PAC-UP" module required for updates
| Product Revision History |
|
Current Revision #: 1.1.7 Description: Fixes reverse output false triggering in vehicles equipped with manual transmission, fixes turn-on pop seen in vehicles equipped with a factory amplifier Release Date: 10-18-13 Revision #: 1.1.6a Description: Fixes reverse output false triggering & digital amp not turning on Revision #: 1.1.6 Description: Fixes "No Signal" text on instrument cluster seen in 2012 vehicles Revision #: 1.1.4a Description: Fixes issue with factory sub not turning on in Alpine system Revision #: 1.1.4 Description: Adds factory VES retention and Voice Prompt & Phone SWC support Revision #: 1.1.3 Description: Initial Release |